MERA RENT guides

How to prepare your venue for a humanoid robot: a checklist for event organisers

How to get a venue and running order ready for a robot: space, flooring, noise, the operator's position and a named contact. With a checklist.

To get ready for a humanoid robot, prepare a clear, level patch of floor away from loudspeakers, a position for the operator with a view of the robot, a running order with the robot's working hours, and one named contact who is reachable on the day. The details for a specific robot and venue are agreed with the rental company after booking, so the earlier you describe the room, the fewer surprises on site.

What should you prepare at the venue before the robot arrives?

Prepare five things before the robot arrives: the show area, the route from the entrance to it, conditions for conversation, the operator's position and a timed running order. Add one contact person who answers the phone on the day.

You do not need to know anything about robots. Describe the room the way you would to a sound hire company: where the entrance is, what stands nearby, when it gets loud, who makes decisions on site. In MERA RENT the details for the chosen robot are agreed with the MERA team after booking, and the operator checks the spot on arrival.

If you would rather start from a ready-made list, use the event robot planner. You answer a few short questions and get a suggested robot, a venue checklist and a booking timeline.

How much space does the robot need, and what kind of floor?

The robot needs a clear, level, dry patch of floor, plus room around it for guests to stand. Exact requirements depend on the model and on whether the robot stays in one place, dances or walks among people, which is why they are confirmed with the company after booking.

Walk the room and check:

  • that the floor is level, with no thresholds, loose cables or rugs that ruck up,
  • that there are no stairs, stage edges or tables with crockery close by,
  • that people who stop by the robot will not block the way through,
  • how the robot gets to its spot: lift, stairs, ramp, door width.

If the robot is going on stage, describe the access: steps or a ramp, the width, the type of floor and where the robot enters from. If it is going to walk among guests, the route is agreed in advance. Outdoors you need a level surface and a covered spot in case of rain.

The model matters too. The small Unitree G1 humanoid is usually carried in by the operator. With the large Unitree H2 humanoid, the entrance, the floor and the space for onlookers are checked before you even book, so expect questions about the room earlier.

How do you sort out the sound so guests can talk to the robot?

Conversation with the robot needs relative quiet, so place it away from loudspeakers and loud music. The robot has to hear the guest and the guest has to hear the robot. In noise, neither works.

A few tips that hold in any room:

  • do not put the robot next to the stage, the bar or the DJ booth,
  • plan conversations for the calmer parts of the programme: guest arrival, breaks, the time after the formal speeches,
  • for the loud stretches plan dancing and photos, which need no quiet,
  • if the robot is to speak from the stage to the whole room, tell the rental company and the venue's technical crew in advance.

Sound for a stage appearance is arranged ahead of time. Pass on the contact details of whoever is in charge of AV at the venue, so the arrangements do not travel through three inboxes.

Where does the operator stand, and what do they need?

The operator stands close to the robot, somewhere with a view of both the robot and the guests. In MERA RENT the operator stays with the robot for the whole working time and can stop it at any moment, so they cannot sit backstage.

Plan for the operator:

  • a place beside the show area that is not hidden by partitions or decorations,
  • access to a power socket nearby,
  • Wi-Fi or mobile coverage where the robot works,
  • a corner for equipment where guests will not trip over it,
  • somewhere for the robot to wait before its entrance and during breaks.

You cannot guess the specifications, and you do not have to. Say what is available in the room and the MERA team will confirm whether it is enough. If the venue's network tends to get overloaded during big events, mention it straight away.

How do you build the running order around the robot?

The running order starts with one question: during which hours should the robot work? You choose the working time when you book. MERA RENT has three packages: up to 2 hours (guest arrival, announcements, opening), up to 4 hours (half a day of a conference or trade show) and up to 8 hours (a full day, with spare batteries).

Put into the plan:

  1. the time crew can enter the venue,
  2. the time doors open to guests,
  3. the programme items involving the robot, with times,
  4. the loud moments (a concert, a show, music) and the quiet ones,
  5. the time the robot finishes work.

Leave some slack. Event schedules slip, and a robot due to introduce a speaker on the hour should be in place before then. If the robot appears in several items spread across the day, choose the longer package instead of hoping the shorter one will stretch.

Who should be the contact person?

The contact person should be someone who is on site on the day, knows the plan and can make decisions. One person, not three. The operator needs to know whom to approach when the robot has to move a few metres or the stage entrance time changes.

Give the company that person's name and phone number, and tell the person when the operator arrives and where the robot is to stand. It helps if the contact also knows the venue manager and the venue technician.

In MERA RENT you exchange messages with the team under "My bookings". That is also where you change the date and check the status of the booking.

A checklist to tick off before the event

Here is a list you can copy into your production schedule:

  • show area chosen: level, dry floor, clear walkways,
  • route from the entrance to the show area checked (doors, lift, stairs),
  • stage access described, if the robot goes on stage,
  • robot placed away from loudspeakers, conversations planned for quiet moments,
  • operator's position with a view of the robot, a power socket and network coverage,
  • a place for the robot to wait before its entrance and during breaks,
  • timed running order sent to the rental company,
  • contact person named and briefed,
  • venue staff know a robot is coming and who is responsible for it,
  • outdoors: cover in case of rain,
  • conversation material handed over: what the robot knows about the company, how it speaks, which topics it avoids.

Example: a company awards dinner, step by step

A company is holding an anniversary awards dinner at a hotel. The robot is to welcome guests in the foyer and later introduce the chief executive's speech.

  1. In the MERA RENT app you choose the type of event, the city, the day, the robot and the working time. The price is shown under the date.
  2. In the request you note that the robot is to go on stage, and describe the access: three steps at the side of the room, or a ramp.
  3. Once the date is confirmed, you send the evening's running order and the venue manager's contact details.
  4. You agree with MERA what the robot says in its welcome and how it introduces the chief executive.
  5. On the day, the operator arrives before the guests, sets up the robot and checks the foyer and the route to the stage with you.
  6. As guests arrive, the robot chats and poses for photos in the foyer, away from the band.
  7. Before the formal part, the operator brings the robot to the stage. After the introduction the robot comes off, and the operator finishes at the agreed time.

More on robots for corporate occasions is on the business events page.

Check available dates and prices

Choose a robot, a city and a date: every day shows the price and whether the robot is free. You can hold a date free of charge for 48 hours.

Open MERA RENT

Questions and answers

Can the robot work outdoors, for example in a garden or a marquee?

Yes, once conditions have been checked for the specific model. You need a level surface and a covered spot in case of rain. In MERA RENT an outdoor show is confirmed separately before the event.

Do I have to carry the robot in or help unload it?

No. In MERA RENT the MERA operator brings the robot, carries it in, sets it up and takes it away afterwards. Your job is to point out the entrance and the way to the show area.

When should I send venue details if I do not have them yet?

As soon as you have them. You can send the booking earlier and follow up with the room description, running order and contact person in a message under "My bookings".

Is there a tool that helps plan a robot for an event?

Yes. The event robot planner on mera.rent asks a few questions and suggests a robot, the number of robots, a venue checklist and a booking timeline. It is free and needs no registration.

Open MERA RENT